"We are back" « oc.at

Zweitauflage Corsair XMS3500C2

Pepman 15.11.2002 - 03:22 1881 44
Posts

Pepman

Ducatisti
Avatar
Registered: Dec 2001
Location: Wien/Bgld.
Posts: 1709
Fremont, CA, November 15, 2002:? Corsair Memory, Inc., an industry leader in
ultra-performance DDR DRAM modules for gaming and overclocking applications,
has announced that it is moving to more aggressive latency settings on its
popular XMS3500 line of ultra-performance memory modules.

"There was some dissatisfaction among our enthusiast customer base regarding
the latency settings for the XMS3500 modules," stated Don Lieberman, VP of
Engineering at Corsair. "We have listened to these customers, and engineered
and qualified a production test that uses more aggressive settings."

The modules are now tested in an Abit KD7 KT400-based motherboard using the
following settings:

Memory bus speed: 2x217 MHz
CAS latency: 2.0 clock cycles
RAS precharge: 3 cycles (was previously 4 cycles)
RAS-to-CAS delay: 3 cycles (was previously 4 cycles)
RAS active to precharge: 7 cycles (was previously 8 cycles)
Command rate: 1T (1 cycle)
Population: 1 module/system


The XMS3500 modules are generally regarded as the very fastest memory modules
available. Independent review sites have confirmed this with extensive side-by-
side testing with other modules. As summarized by one UK reviewer, "Corsair
have yet again upped the ante in the memory stakes with what is some of the
fastest DDR memory on the planet... the fact is that Corsair are offering
simply the best memory around."

Further information and specifications on this product and other XMS products can be found at Corsair's web site (http://www.corsairmemory.com/xms/). These modules can be purchased through Corsair?s authorized sales channels listed at http://www.corsairmemory.com/xms/xms_sales.html.


hmmm - ich hab´ ja keine 3500C2er - aber vermutlich gingen die meisten (zumindest einzeln) auch mit diesen Settings der 2t-Auflage (jetzt ist´s halt garantiert).

-velo-

Geschwindigkeitsrausch
Avatar
Registered: Jul 2002
Location: Virtual Reality
Posts: 1974
wenn es garantiert ist heisst es meistens das sie NOCH höher gehen .. denn die firmen nehmen immer den WORST CASE an .. :D

Nibbler

OC Addicted
Registered: Jul 2002
Location: OÖ/Attnang-Puch..
Posts: 4546
wann wirds die dann geben?

sub-zero

Ph33r my !c3c0ld b33r
Registered: Dec 2000
Location: Graz
Posts: 1759
die erstauflage war imho nach schrott

alls andere ausser der vorgeschriebenen takteinstellungen waren nicht seht stabil -> hab mir die corsair 32000xms geholt und die sind besser gangen als die xms3500

finds aber gut das corsair auf die leute hört :)

Pepman

Ducatisti
Avatar
Registered: Dec 2001
Location: Wien/Bgld.
Posts: 1709
Zitat von -velo-
wenn es garantiert ist heisst es meistens das sie NOCH höher gehen .. denn die firmen nehmen immer den WORST CASE an .. :D

Vorallem bei Corsair ist im Normalfall noch einiges drinnen (und bis zu 2,8 Vdimm darf mann auch officiell gehen, ohne dass man Scherereien mit der Garantie hat) - aber wie hier auch schon erwähnt, die Erstauflage war leider mies und dementsprechend war nicht viel mehr herauszubekommen.....

Juggernout

Focus.
Avatar
Registered: Jul 2002
Location: Wien
Posts: 3639
Die 1. 3500er waren schrott ?!?!?

3N54

Bring the Thunder
Avatar
Registered: Nov 2001
Location: Linz
Posts: 2701
hmm find ich ned wel ich hab die 3500er udn find sie ganz gut !

sub-zero

Ph33r my !c3c0ld b33r
Registered: Dec 2000
Location: Graz
Posts: 1759
bei mir sinds nicht höher gangen als 2.5-3-3-7 bei 217ddr und 2.7 volt

und das is scho a bissi schwach :)

Murph

Nerd
Avatar
Registered: Dec 2001
Location: Vienna
Posts: 9236
Zitat von sub-zero
bei mir sinds nicht höher gangen als 2.5-3-3-7 bei 217ddr und 2.7 volt

und das is scho a bissi schwach :)

da hast aber mehr als einen riegel drin ghabt, oder?
ansosnten wärs ja ein Garantiefall...

sub-zero

Ph33r my !c3c0ld b33r
Registered: Dec 2000
Location: Graz
Posts: 1759
war nur ein riegel :)

und timings waren ja nur für das dumme asus amd brettl

2-4-4-8 das kann i net amal einstellen auf meinem board

Murph

Nerd
Avatar
Registered: Dec 2001
Location: Vienna
Posts: 9236
ich glaub eher dein board hat limitiert - soll kein flame sein, aber remember: es gibt besseres :)

und der 761 wurde nicht unbedingt für busspeeds jenseits der 170 gebaut :)

sub-zero

Ph33r my !c3c0ld b33r
Registered: Dec 2000
Location: Graz
Posts: 1759
nö board limitiert net :)

weil jetzt mit die corsair xms3200c2 pt hab ich ddr 220 bei 2.7v bei 2-3-3-7

btw.: ich hab no nie einen amd gehabt ;)

-velo-

Geschwindigkeitsrausch
Avatar
Registered: Jul 2002
Location: Virtual Reality
Posts: 1974
@subbi und trotzdem willst mir deine xms3500 net verkaufn :D

Pepman

Ducatisti
Avatar
Registered: Dec 2001
Location: Wien/Bgld.
Posts: 1709
Zitat von Juggernout
Die 1. 3500er waren schrott ?!?!?

Schrott ist ein bisserl übertrieben gesagt - aber wenn ich bedenke, dass meine Corsair XMS2400 mittlerweile auf fastest Timings, CL2 und einem FSB von 166 werkeln (garantiert war damals glaube ich 150FSB mit CL2.5) - dann müssten die XMS3500 eigentlich soooooo viel erreichen (und das tun sie leider nicht)! Da waren eben alle Vorgänger besser.

Aber jetzt ist ja hoffentlich alles anders/besser! :)

sub-zero

Ph33r my !c3c0ld b33r
Registered: Dec 2000
Location: Graz
Posts: 1759
Zitat von -velo-
@subbi und trotzdem willst mir deine xms3500 net verkaufn :D

habi nimmer -> eintauscht
Kontakt | Unser Forum | Über overclockers.at | Impressum | Datenschutz