"Christmas - the time to fix the computers of your loved ones" « Lord Wyrm

how to?

fraggzor 25.10.2004 - 18:15 1161 13 Thread rating
Posts

fraggzor

Bloody Newbie
Registered: Oct 2004
Location: Braga
Posts: 7
can i overclock my AMDxp3000+, with a asus a7n8x-deluxe?

dio

Here to stay
Registered: Nov 2002
Location: Graz
Posts: 4917
Yes.

fraggzor

Bloody Newbie
Registered: Oct 2004
Location: Braga
Posts: 7
HOW?

sk/\r

i never asked for this
Avatar
Registered: Dec 2002
Location: oö
Posts: 10970
the all known game with multi and fsb... ^^

Joe_the_tulip

Editor
banned by FireGuy
Avatar
Registered: Mar 2003
Location: Wien
Posts: 16464
tweak ram timings to 2-2-2-11 too. but be careful you cool good enough!

fraggzor

Bloody Newbie
Registered: Oct 2004
Location: Braga
Posts: 7
MULTI IS BLOCKED, BUT FSB GOES TO 176, (EXAMPLE 180),PC DOESN'T START....
Bearbeitet von fraggzor am 25.10.2004, 21:43

sk/\r

i never asked for this
Avatar
Registered: Dec 2002
Location: oö
Posts: 10970
increase vcore in little steps. sorry but i don't know what is standard vcore for your cpu. and watch the temp... ;)

~PI-IOENIX~

Pappenschlosser
Avatar
Registered: Nov 2002
Location: mühl4tl / graz
Posts: 4721
even increase Vdimm up to 2,8/9.

fraggzor

Bloody Newbie
Registered: Oct 2004
Location: Braga
Posts: 7
the standard vcore of amd xp 3000 is 1.65v
dimm's--> 2.6

Joe_the_tulip

Editor
banned by FireGuy
Avatar
Registered: Mar 2003
Location: Wien
Posts: 16464
mind your cooling! with a nice aircooling you could push vcore up to 1.8 or even 1.9, with water/phase change cooling even more. a vdimm of 2,9V shouldn't hurt your Ram at all.

fraggzor

Bloody Newbie
Registered: Oct 2004
Location: Braga
Posts: 7
my cpu cooler is coolermaster aero7+ @35º
board--> @ 15º
my case have 5 fan's, it's a antec plusviewAMG, the same model as "chieftec Dragon"
Bearbeitet von fraggzor am 26.10.2004, 14:24

fraggzor

Bloody Newbie
Registered: Oct 2004
Location: Braga
Posts: 7
multi could be desblocked?

i tryed pinnmod but doesn't work...

Joe_the_tulip

Editor
banned by FireGuy
Avatar
Registered: Mar 2003
Location: Wien
Posts: 16464
well...


hope xou put enough thermal paste on the die an the northbridge (of course beyond the coolers :D). the other 5 are fans but not coolers. for oc i qould arrange them like that:
one on the mosfets
one on the rams
one on the graphics card
one as intake low in the front of the case
one rear at the same hight as the cpucooler.

than:
get yourself the best modbios for your a7n8x
give 1.8VCore
Push Vdimm to 2,9, leave timings@spd.
download 8rdavcore and its manual
boot up with stock settings(FSB an timings). start prime95
push the fsb to 175 and then up in 5mhz steps. wait for 2 Minutes at least whether prime shows errors. then take the next step. an mind the temps. it should not go far above 65 or 70, otherwise it won't be stable later on.
when prime/whole machine crashes => boot up normal again an start 5mhz before it crashed. you could try to push vcore even further, if the temp allows it!

btw. what kingston rams do you exactly own?

fraggzor

Bloody Newbie
Registered: Oct 2004
Location: Braga
Posts: 7
i have this model:

Kingston ValueRAM Dual Channel Kit 184 Pin 1G(512MBx2) DDR PC-3200
Kontakt | Unser Forum | Über overclockers.at | Impressum | Datenschutz