Pentium IV mit 2,8 GHz verfügbar - Seite 3

Seite 3 von 3 - Forum: Prozessoren auf overclockers.at

URL: https://www.overclockers.at/prozessoren/pentium_iv_mit_28_ghz_verfuegbar_45994/page_3 - zur Vollversion wechseln!


tombman schrieb am 26.08.2002 um 19:19


Redphex schrieb am 26.08.2002 um 19:22

na. is eigentlich net arg.
auf vrzone im 17000 3dmarks artikel sind pix und kurze beschreibung

bringts aber eh nur mitn p4t-e und p4t-533-c


tombman schrieb am 26.08.2002 um 19:51

Zitat von Redphex
na. is eigentlich net arg.
auf vrzone im 17000 3dmarks artikel sind pix und kurze beschreibung

bringts aber eh nur mitn p4t-e und p4t-533-c

ma i brauch an link :bash:


Redphex schrieb am 26.08.2002 um 19:56

Zitat
For the TurboPLL connection you must get external clock circuit and 14,3MHz crystal. This is best done by sawing up those apart from old broken motherboard. It is worthwhile to get such clock circuit which you can get datasheets from the internet. From the external clock circuit you must know the following connectors: 3,3V operating voltage, GND and 14,3MHz output. When above-mentioned factors have been sorted out, you must remove the 14,3MHz reference crystal from the Asus P4T533-C motherboard. It is worthwhile to connect base so you can easily change different kind of crystals. After this you have to disconnect resistors R143 and R144 near the clock circuit. The outer clock circuit feeds 14,3MHz reference frequency to the motherboard. Wires (in the picture red and yellow) are connecter into the disconnected resistors outer pins (when you look from the clock circuit).

Blue wires feed the operating voltage +3,3V and GND to the external clock circuit. Motherboards 14,3MHz crystal was replaced by 16,93MHz crystal. With fast calculations we get the motherboards smallest possible channel frequency of 118,39MHz and the largest possible channel frequency of 177,58MHz.

(16,93MHz / 14,3MHz) * 100MHz = 118,39MHz

With different kind of crystals you get different kind of channel speeds of course. For example 20MHz crystal the 150MHz channel speed is 209MHz.
click to enlarge


Cobase schrieb am 26.08.2002 um 19:57

ICh find den deppaten Artikel a nimmer, dabei war der sicher auf VR-Zone, aber bei denen auf der Site was zu finden ist echt reine Glückssache. :mad: :bash:

EDIT: Verdammt, wurde ge0wned! :p


Redphex schrieb am 26.08.2002 um 20:00

hat scho an grund warum i interessante sachen lokal archivier ;)




overclockers.at v4.thecommunity
© all rights reserved by overclockers.at 2000-2025