SOYO K7V DRAGON Ultra KT333 Board

Processor :
Support AMD Socket-A type Processor
Including Duron, Athlon, Athlon XP

Chipset :
VIA KT333 / 8233A. chipsets
Support 200/266 MHz FSB

System Memory :
Three 184-pin DDR SDRAM 2.5V DIMM sockets support up to 3GB (DDR 200/266/333)

Expansion Slots :
Five 32-bit Bus Mastering PCI slots (V2.2 compliant)
One Universal AGP Pro slot (support 1x/2x/4x mode)

On Board Audio Subsystem :
On board CMI 8738 Audio chip to provide 6 channels audio solution
Supports optical output & SPDIF output

On Board Ultra I/O Chip :
Two RS-232 serial ports (16550 UART compatible)
One parallel printer port (SPP/EPP/ECP mode)
One FDD port (Supports 3 mode, 1.2/1.44/2.88 MB FDD
Provides IrDA ports with optional cable for transceiver
Provides 4 USB ports (2 rear, 2 front)

Ultra DMA IDE Ports :
Four independent channels for eight IDE devices (two for raid)
Supports up to PIO Mode 5 and UDMA 66/100/133
Two PCI bus mastering ATA E-IDE ports

Boot-Block Flash BIOS :
Award PCI BIOS with ACPI function
Supports multiple-boot from E-IDE/SCSI/CD-ROM/FDD LS120/ZIP
2 Mbyte Flash ROM

Board Dimensions :
Four layers, 30.5 cm x 24.5 cm (12¡± x 9.6¡±)
ATX form factor

Enhanced PC Health Monitoring :
On-board voltage monitors
CPU fan speed monitor
CPU temperature monitoring through flexible thermal sensor
CPU temperature overheats protection

Double Stack Back-Panel I/O Connectors :
PS/2 Mini-DIN mouse & keyboard ports
Two USB ports
One RJ45 connector
Two D-Sub 9-pin male serial ports
One D-Sub 25-pin female printer port
Audio I/O: LINE-Outx1 , LINE-Inx1, MIC JACK x1
One game port

Features :
CPU core voltage & FSB & multiplier could be adjusted via BIOS setup
Supports WOL (Wake On LAN) function to simplify network management
Supports Smart Card Reader connector
On board 10/100 Mbps Ethernet function by Realtek 8100B controller
SOYO Wizard On Hand II Function£ºCPU FSB Frequency can be setup by 1MHz increment
Embedded Hipoint IDE-RAID chip, provide ATA133 IDE- RAID 0,1,0+1
Suspend To RAM, Suspend To Disk
DIMM voltage adjustable
AGP Pro voltage adjustable
Supports High-speed USB 2.0 ports (4 ports)
Free ¥Ò-BOX (SOYO Bayone ¢â) included!!! (Compact flash card/ Smart Media card Reader / Writer, Two Front USB port)

Doch, ist sie schon, steht unter "Features" als "Dimm Voltage adjustable".

@ cobase
oh sorry, hab da ned weiterglesen

@simml
wo liegt der unterschied cd/ce?

Zitat von Thehackman

wo liegt der unterschied cd/ce?

von planet3dnow.de

On February 20 VIA will announce KT333 chipset supporting the new PC2700 DDR SDRAM, featuring old 266MB/sec V-Link bus, no AGP 8x support and VT8233A South Bridge (in other words, it will be an ordinary pseudo-new chipset, as we called this kind of solutions last year). The KT333 North Bridge revision will be CD. The Inquirer claims that VIA has already shipped over 10,000 KT333 CD Rev. chips. It is exactly the revision all first mainboards, which have already started selling are built on. The mainboard manufacturers are free to provide their products with optional VT6202 chip supporting USB 2.0...
Later we will see KT333 CE revision, which will support AGP 8x and 533MB/sec V-Link. CE will be fully pin-to-pin compatible with CD revision. Until a new VT8235 South Bridge comes out, KT333 North Bridge will be provided with the old VT8233A South Bridge, which means that V-Link bandwidth will be only 266MB/sec.
Some time in April-May VT8235 South Bridge is expected to come out (it will support V-Link 533MB/sec and USB 2.0) and only then the KT333 core logic will become a completely new Socket A solution with PC2700 DDR SDRAM support (KT333 North Bridge), AGP 8x (KT333 rev. CE), 533MB/sec V-Link (between KT333 rev. CE and VT8235) and USB 2.0 (VT8235).

Zuerst werden also die ca. 10.000 bereits produzierten KT333 Northbridges verkauft - ohne AGP8x Support. Danach kommt die Northbridge, die eigentlich für den KT333A gedacht war (mit AGP8x Support) und im April wird die neue VT8235 Southbridge nachgeschoben, welche die V-Link 533 MB/s Technik unterstützen wird und USB 2.0 ohne zusätzlichen Chip. Wer mit dem KT333 liebäugelt sollte daher eventuell zumindest bis zum Board 10.001 warten...


mfg
x37

...ich habe mich soeben verliebt....aber nix meiner Abit sagen

*auchwollen*

Zitat von Pinball

Da brauch ich nix deiner Abit zu sagen, wenn da die neue schwester mit nem KT333 kommt wirst dich wieder neu verlieben, Abit is halt einfach geil (und teuer).

3mal abit @ home
abit roxxxx ... bin ned mehr verliebt, sondern schon verheiratet


mfg simml

beinage 1 Monat später:
auch nach der neuen ABIT-Tochter bin ich in dieses Board verliebt!

Wo is jetzt der unterschied zwischen cd & ce???

Man sollte doch vorher lesen!