wergor
connoisseur de mimi
|
bin gestern draufgekommen, dass eine meiner 3gb wd red im server 1 current pending sector anzeigt. ich habe zwar im internet anleitungen gefunden wie man das problem fixen kann, leider wird bei mir die nummer des sektors nicht angezeigt. dieser kollege hatte das gleiche problem, aber einfach den ganzen freien speicher zuzumüllen finde ich eigentlich nicht so prickelnd. der letzte extended self test ist in der nacht von gestern auf heute gerannt. [root@localhost ~]# smartctl --all /dev/sda
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-431.11.2.el6.x86_64] (local build)
Copyright (C) 2002-12 by Bruce Allen, [url]http://smartmontools.sourceforge.net[/url]
=== START OF INFORMATION SECTION ===
Device Model: WDC WD30EFRX-68AX9N0
Serial Number: WD-WCC1T1219078
LU WWN Device Id: 5 0014ee 2b358ad9a
Firmware Version: 80.00A80
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ACS-2 (revision not indicated)
Local Time is: Thu Jul 3 18:45:20 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (41040) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 412) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x70bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 75
3 Spin_Up_Time 0x0027 186 182 021 Pre-fail Always - 5691
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 15
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 7191
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 15
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 8
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 6
194 Temperature_Celsius 0x0022 114 109 000 Old_age Always - 36
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 7180 -
# 2 Short offline Completed without error 00% 7171 -
# 3 Extended offline Completed without error 00% 984 -
# 4 Extended offline Completed without error 00% 93 -
# 5 Short offline Completed without error 00% 70 -
# 6 Short offline Aborted by host 10% 48 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
[root@localhost ~]# cat /var/log/messages | grep smart | grep sda
Jul 2 23:10:54 localhost smartd[925]: Device: /dev/sda [SAT], opened
Jul 2 23:10:54 localhost smartd[925]: Device: /dev/sda [SAT], WDC WD30EFRX-68AX9N0, S/N:WD-WCC1T1219078, WWN:5-0014ee-2b358ad9a, FW:80.00A80, 3.00 TB
Jul 2 23:10:54 localhost smartd[925]: Device: /dev/sda [SAT], not found in smartd database.
Jul 2 23:10:54 localhost smartd[925]: Device: /dev/sda [SAT], enabled SMART Attribute Autosave.
Jul 2 23:10:55 localhost smartd[925]: Device: /dev/sda [SAT], enabled SMART Automatic Offline Testing.
Jul 2 23:10:55 localhost smartd[925]: Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list.
Jul 2 23:10:55 localhost smartd[925]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 2 23:11:38 localhost smartd[957]: Device: /dev/sda [SAT], opened
Jul 2 23:11:38 localhost smartd[957]: Device: /dev/sda [SAT], WDC WD30EFRX-68AX9N0, S/N:WD-WCC1T1219078, WWN:5-0014ee-2b358ad9a, FW:80.00A80, 3.00 TB
Jul 2 23:11:38 localhost smartd[957]: Device: /dev/sda [SAT], not found in smartd database.
Jul 2 23:11:38 localhost smartd[957]: Device: /dev/sda [SAT], enabled SMART Attribute Autosave.
Jul 2 23:11:38 localhost smartd[957]: Device: /dev/sda [SAT], enabled SMART Automatic Offline Testing.
Jul 2 23:11:38 localhost smartd[957]: Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list.
Jul 2 23:11:39 localhost smartd[957]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 2 23:12:52 localhost smartd[1031]: Device: /dev/sda [SAT], opened
Jul 2 23:12:52 localhost smartd[1031]: Device: /dev/sda [SAT], WDC WD30EFRX-68AX9N0, S/N:WD-WCC1T1219078, WWN:5-0014ee-2b358ad9a, FW:80.00A80, 3.00 TB
Jul 2 23:12:52 localhost smartd[1031]: Device: /dev/sda [SAT], not found in smartd database.
Jul 2 23:12:52 localhost smartd[1031]: Device: /dev/sda [SAT], enabled SMART Attribute Autosave.
Jul 2 23:12:52 localhost smartd[1031]: Device: /dev/sda [SAT], enabled SMART Automatic Offline Testing.
Jul 2 23:12:52 localhost smartd[1031]: Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list.
Jul 2 23:12:53 localhost smartd[1031]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 2 23:42:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 00:12:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 00:12:53 localhost smartd[1040]: Device: /dev/sda [SAT], SMART Usage Attribute: 7 Seek_Error_Rate changed from 100 to 200
Jul 3 00:12:53 localhost smartd[1040]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 114 to 112
Jul 3 00:12:53 localhost smartd[1040]: Device: /dev/sda [SAT], self-test in progress, 90% remaining
Jul 3 00:42:54 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 00:42:54 localhost smartd[1040]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 112 to 111
Jul 3 00:42:54 localhost smartd[1040]: Device: /dev/sda [SAT], self-test in progress, 80% remaining
Jul 3 01:12:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 01:12:53 localhost smartd[1040]: Device: /dev/sda [SAT], self-test in progress, 70% remaining
Jul 3 01:42:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 02:12:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 02:12:53 localhost smartd[1040]: Device: /dev/sda [SAT], self-test in progress, 60% remaining
Jul 3 02:12:53 localhost smartd[1040]: Device: /dev/sda [SAT], skip scheduled Short Self-Test; 60% remaining of current Self-Test.
Jul 3 02:42:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 02:42:53 localhost smartd[1040]: Device: /dev/sda [SAT], self-test in progress, 50% remaining
Jul 3 03:12:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 03:12:53 localhost smartd[1040]: Device: /dev/sda [SAT], self-test in progress, 40% remaining
Jul 3 03:42:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 04:12:54 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 04:12:54 localhost smartd[1040]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 111 to 112
Jul 3 04:12:54 localhost smartd[1040]: Device: /dev/sda [SAT], self-test in progress, 30% remaining
Jul 3 04:42:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 04:42:53 localhost smartd[1040]: Device: /dev/sda [SAT], self-test in progress, 20% remaining
Jul 3 05:12:54 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 05:12:54 localhost smartd[1040]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 112 to 113
Jul 3 05:42:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 05:42:53 localhost smartd[1040]: Device: /dev/sda [SAT], self-test in progress, 10% remaining
Jul 3 06:12:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 06:42:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 07:12:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 07:12:53 localhost smartd[1040]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 113 to 114
Jul 3 07:42:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 07:42:53 localhost smartd[1040]: Device: /dev/sda [SAT], previous self-test completed without error
Jul 3 08:12:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 08:12:53 localhost smartd[1040]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 114 to 115
Jul 3 08:42:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 09:12:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 09:42:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 10:12:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 10:42:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 11:12:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 11:42:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 12:12:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 12:12:53 localhost smartd[1040]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 115 to 114
Jul 3 12:42:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 13:12:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 13:42:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 14:12:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 14:42:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 15:12:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 15:42:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 16:12:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 16:42:54 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 17:12:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 17:42:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 18:12:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jul 3 18:42:53 localhost smartd[1040]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
|
COLOSSUS
AdministratorGNUltra
|
Der Sinn eines Pending Sector ist ja, dass du ihn erstmal ignorieren kannst. Beim naechsten Schreibvorgang, der den Sektor betrifft, wird er mit einem aus der Spare Area transparent remapped und "getauscht". Also: Lass das Ding einfach in Ruhe. 
|
wergor
connoisseur de mimi
|
Der Sinn eines Pending Sector ist ja, dass du ihn erstmal ignorieren kannst. Beim naechsten Schreibvorgang, der den Sektor betrifft, wird er mit einem aus der Spare Area transparent remapped und "getauscht". Also: Lass das Ding einfach in Ruhe. thx, werde ich machen Low Level Format wär zB eine Lösung. würde mehrere tage dauern und ist nicht wirklich eine bessere lösung als den ganzen freien speicher vollzuschreiben. colossus' idee klingt besser 
|
(und 100+ die schon remapped wurden) ... ist aber nix wichtiges drauf auf der platte, und bis jetzt rennt sie noch.
Anmeldung