ATITool 0.0.22 released

JC

Vereinsmitglied
Disruptor

Registered: Feb 2001
Location: Katratzi
Posts: 9066

01.09.2004 - 10:18

Zitat
Changelog
Fixes to card detection on some ATI chipsets
Fixed "When setting the speed in the log the selected speed is shown not the actual speed it is set to." (#38)
Added infobox about possible problems when FRAPS is running
Removed fan control tab for 9600.
Some fixes to "try to keep gpu temp at". It will only work while ATITool is running. If you close ATITool fan speeds are set to ATI's defaults
Fixed temp. reading error which showed 20° on 9800s with high load sometimes
Disabled creation of file C:\Atitool detection log.txt
Fixed excessive log entries generated during Find Max (#29)
Fixed 3D detection for XP SP2 + AMD64 (#25)
Forced 3D detection on for all executables starting with "bf_vietnam" (Battlefield: Vietname) until a proper fix is found
Forced 3D detection on for all executables starting with "nwmain" (Neverwinter Nights) until a proper fix is found
Fixed rounding error in fan speed settings (#16)
Fixed rounding error in font size display in temp. settings (#23)
Added current fan speed display to fan speed settings (#22)
Memory timings editor is active now - values are not permanent and are reset at reboot. USE AT YOUR OWN RISK.
Gamma settings are reapplied when display mode is changed (#14)
Gamma settings panel shows numbers (#14)
Added fan control option "Try to keep GPU temp. at xx°C" - this option is only available if temp. monitoring is enabled
Added mini stats to temp. monitoring settings page
Several speed optimized artifact detection code
Dump bios button disabled on 9200 until a fix is found
Replace temp. remote / local by "GPU" / "GPU environment"
Fixed cosmetic bug in temp. settings panel (#15)
Fixed bug with log file max. size .. the value was interpreted as Bytes (#13)
Added include list for 3D detection
No "scan running" message to log file right after start
Fixed crash in 3D detection for 3dmark2001 and probably other apps
Gamma hotkeys are disabled when gamma control is disabled
Lots of fixes based on the great feedback after the 0.0.21 release, critical fixes are already incorporated into the 0.0.21 download
Added option to scanning settings: "disable screensaver while scanning"
Fixed ATI fan control. for some reason ATI defaults result in fan speeds > 100% to be programmed. This means that any fan speed >75% is actually 100% (can't run the fan faster than 100%). ATITool fixes this by setting the right register on the temp. chip.
Moved fan speed registry key so its not lost every time you reinstall ATITool

http://www.techpowerup.com/atitool/

HANNIBAL

AMD FREAK

Registered: Nov 2002
Location: Graz
Posts: 883

01.09.2004 - 10:30

Zitat von JC
http://www.techpowerup.com/atitool/

Das ist echt toll da kannst sogar die Ramtimings verstellen. Leider kenn ich mich da ned aus.

UncleFucka

-

Registered: Jun 2002
Location: CH
Posts: 4737

01.11.2004 - 16:30

kanns sein das das mit 4.11 nicht mehr geht?

Joe_the_tulip

Vereinsmitglied
banned by FireGuy

Registered: Mar 2003
Location: Wien
Posts: 16479

01.11.2004 - 16:36

ev geht des: http://forums.techpowerup.com/attac...attachmentid=73

glenn062k

Big d00d

Registered: Mar 2004
Location: V
Posts: 225

01.11.2004 - 16:36

4.11=beta?

nfin1te

Vereinsmitglied
nuttiest knifenut

Registered: May 2002
Location: Wien
Posts: 7787

01.11.2004 - 16:37

Zitat von Joe_the_tulip
ev geht des: http://forums.techpowerup.com/attac...attachmentid=73

not logged in

Joe_the_tulip

Vereinsmitglied
banned by FireGuy

Registered: Mar 2003
Location: Wien
Posts: 16479

01.11.2004 - 16:41

http://forums.techpowerup.com/showthread.php?t=1111

gehts jetzt?

glenn062k

Big d00d

Registered: Mar 2004
Location: V
Posts: 225

01.11.2004 - 16:44

jo passt

Donni

OC Addicted

Registered: May 2004
Location: Wels OÖ
Posts: 1169

01.11.2004 - 16:48

Blöde frage,aber: gibts so ein TOOL für eine NV6800GT auch?
Habe vorher eine 9800SE@9800Pro gehabt ,war echt ein Super Tool!

Danke

Garbage

Elder
The Wizard of Owls

Registered: Jul 2000
Location: GR.ch|TI.ch
Posts: 11393

01.11.2004 - 17:05

http://www.guru3d.com/rivatuner/

Donni

OC Addicted

Registered: May 2004
Location: Wels OÖ
Posts: 1169

01.11.2004 - 19:22

Danke, das habe ich nicht gemeint!
Ich meinte so ein NVTool der die Graka übetaktet und max.Core und max. Mem sucht für NV graka!?

V!Ct0R

Here to stay

Registered: Oct 2003
Location: vorm PC
Posts: 2190

01.11.2004 - 19:26

glaub nicht das es sowas für nv gibt. coolbits is noch immer das beste für nv grakas (bin aber auch nvidia neuling -_-)

Garbage

Elder
The Wizard of Owls

Registered: Jul 2000
Location: GR.ch|TI.ch
Posts: 11393

01.11.2004 - 19:41

Zitat von Donni
Danke, das habe ich nicht gemeint!
Ich meinte so ein NVTool der die Graka übetaktet und max.Core und max. Mem sucht für NV graka!?

soll ich riechen was du genau meinst?
schreib gleich genau hin was du willst und dann bekommst auch entsprechende antworten.

ansonsten schließ ich mich meinem vorposter an, für nv wär mir so ein tool nicht bekannt.

Donni

OC Addicted

Registered: May 2004
Location: Wels OÖ
Posts: 1169

01.11.2004 - 19:47

Bleib Cool mein Freund !

_re:loaded

Little Overclocker

Registered: Aug 2004
Location: Vienna
Posts: 65

02.11.2004 - 21:42

danke hätte fast drauf vergessen

JC Vereinsmitglied Disruptor Registered: Feb 2001 Location: Katratzi Posts: 9066	01.09.2004 - 10:18 Zitat Changelog Fixes to card detection on some ATI chipsets Fixed "When setting the speed in the log the selected speed is shown not the actual speed it is set to." (#38) Added infobox about possible problems when FRAPS is running Removed fan control tab for 9600. Some fixes to "try to keep gpu temp at". It will only work while ATITool is running. If you close ATITool fan speeds are set to ATI's defaults Fixed temp. reading error which showed 20° on 9800s with high load sometimes Disabled creation of file C:\Atitool detection log.txt Fixed excessive log entries generated during Find Max (#29) Fixed 3D detection for XP SP2 + AMD64 (#25) Forced 3D detection on for all executables starting with "bf_vietnam" (Battlefield: Vietname) until a proper fix is found Forced 3D detection on for all executables starting with "nwmain" (Neverwinter Nights) until a proper fix is found Fixed rounding error in fan speed settings (#16) Fixed rounding error in font size display in temp. settings (#23) Added current fan speed display to fan speed settings (#22) Memory timings editor is active now - values are not permanent and are reset at reboot. USE AT YOUR OWN RISK. Gamma settings are reapplied when display mode is changed (#14) Gamma settings panel shows numbers (#14) Added fan control option "Try to keep GPU temp. at xx°C" - this option is only available if temp. monitoring is enabled Added mini stats to temp. monitoring settings page Several speed optimized artifact detection code Dump bios button disabled on 9200 until a fix is found Replace temp. remote / local by "GPU" / "GPU environment" Fixed cosmetic bug in temp. settings panel (#15) Fixed bug with log file max. size .. the value was interpreted as Bytes (#13) Added include list for 3D detection No "scan running" message to log file right after start Fixed crash in 3D detection for 3dmark2001 and probably other apps Gamma hotkeys are disabled when gamma control is disabled Lots of fixes based on the great feedback after the 0.0.21 release, critical fixes are already incorporated into the 0.0.21 download Added option to scanning settings: "disable screensaver while scanning" Fixed ATI fan control. for some reason ATI defaults result in fan speeds > 100% to be programmed. This means that any fan speed >75% is actually 100% (can't run the fan faster than 100%). ATITool fixes this by setting the right register on the temp. chip. Moved fan speed registry key so its not lost every time you reinstall ATITool http://www.techpowerup.com/atitool/
HANNIBAL AMD FREAK Registered: Nov 2002 Location: Graz Posts: 883	01.09.2004 - 10:30 Zitat von JC http://www.techpowerup.com/atitool/ Das ist echt toll da kannst sogar die Ramtimings verstellen. Leider kenn ich mich da ned aus.
UncleFucka - Registered: Jun 2002 Location: CH Posts: 4737	01.11.2004 - 16:30 kanns sein das das mit 4.11 nicht mehr geht?
Joe_the_tulip Vereinsmitglied banned by FireGuy Registered: Mar 2003 Location: Wien Posts: 16479	01.11.2004 - 16:36 ev geht des: http://forums.techpowerup.com/attac...attachmentid=73
glenn062k Big d00d Registered: Mar 2004 Location: V Posts: 225	01.11.2004 - 16:36 4.11=beta?
nfin1te Vereinsmitglied nuttiest knifenut Registered: May 2002 Location: Wien Posts: 7787	01.11.2004 - 16:37 Zitat von Joe_the_tulip ev geht des: http://forums.techpowerup.com/attac...attachmentid=73 not logged in
Joe_the_tulip Vereinsmitglied banned by FireGuy Registered: Mar 2003 Location: Wien Posts: 16479	01.11.2004 - 16:41 http://forums.techpowerup.com/showthread.php?t=1111 gehts jetzt?
glenn062k Big d00d Registered: Mar 2004 Location: V Posts: 225	01.11.2004 - 16:44 jo passt
Donni OC Addicted Registered: May 2004 Location: Wels OÖ Posts: 1169	01.11.2004 - 16:48 Blöde frage,aber: gibts so ein TOOL für eine NV6800GT auch? Habe vorher eine 9800SE@9800Pro gehabt ,war echt ein Super Tool! Danke
Garbage Elder The Wizard of Owls Registered: Jul 2000 Location: GR.ch\|TI.ch Posts: 11393	01.11.2004 - 17:05 http://www.guru3d.com/rivatuner/
Donni OC Addicted Registered: May 2004 Location: Wels OÖ Posts: 1169	01.11.2004 - 19:22 Danke, das habe ich nicht gemeint! Ich meinte so ein NVTool der die Graka übetaktet und max.Core und max. Mem sucht für NV graka!?
V!Ct0R Here to stay Registered: Oct 2003 Location: vorm PC Posts: 2190	01.11.2004 - 19:26 glaub nicht das es sowas für nv gibt. coolbits is noch immer das beste für nv grakas (bin aber auch nvidia neuling -_-)
Garbage Elder The Wizard of Owls Registered: Jul 2000 Location: GR.ch\|TI.ch Posts: 11393	01.11.2004 - 19:41 Zitat von Donni Danke, das habe ich nicht gemeint! Ich meinte so ein NVTool der die Graka übetaktet und max.Core und max. Mem sucht für NV graka!? soll ich riechen was du genau meinst? schreib gleich genau hin was du willst und dann bekommst auch entsprechende antworten. ansonsten schließ ich mich meinem vorposter an, für nv wär mir so ein tool nicht bekannt.
Donni OC Addicted Registered: May 2004 Location: Wels OÖ Posts: 1169	01.11.2004 - 19:47 Bleib Cool mein Freund !
_re:loaded Little Overclocker Registered: Aug 2004 Location: Vienna Posts: 65	02.11.2004 - 21:42 danke hätte fast drauf vergessen

ATITool 0.0.22 released

Forum Index > Software > Applications, Apps & Drivers

JC

HANNIBAL

UncleFucka

Joe_the_tulip

glenn062k

nfin1te

Joe_the_tulip

glenn062k

Donni

Garbage

Donni

V!Ct0R

Garbage

Donni

_re:loaded